Micro-Mesh Discs – Hook and Loop or Self Adhesive
Micro-Mesh Discs – Hook and Loop or Self Adhesive
Abrasive discs available in 1 inch or 2 inch diameter in any Micromesh grade.
1- Regular – for plastics and soft metals
2- MX for hard metals
3- AO for aluminium and Corian (solid surface)
Click Here to check you our handy conversion chart and read a little more about Micro-Mesh
SOLD PER 50
Micro-Mesh Discs – Hook and Loop or Self Adhesive
Micromesh Benefits
* Better Surface Contact
The crystals in the conventional abrasives are locked at irregular heights and at random angles. Many never touch the working surface. The Micro-Mesh® system allows the crystals to move – depressing to seek a common level – while rotating their planning chips into alignment. Consequently, this creates a smooth shaving action rather than gouging and abrading the surface – an ultrafine scratch pattern results.
* Larger Crystals
The unique ‘Floating Suspension’ of Micro-Mesh® crystals allow us to use relatively large grit to produce super finishes. Micro-Mesh® removes the peaks of the previous scratch pattern without gouging deeper channels.
* Less Loading
Using larger crystals leaves a large valley between crystals relative to the very fine particles removed. These fine particles will fall free of the crystals and clear of the freshly worked
surface.
* Reduced Friction
Much of the heat generated during conventional sanding comes from abraded particles loading the abrasive. This heat can
actually weld the abraded particles back onto the workpiece, creating a false surface. At some future time these particles may come loose, causing part failure. With Micro-Mesh® high heating and welding just can’t occur, assuring surface integrity.
* Longer Life
By avoiding the heat producing friction that can fracture and destroy crystals, Micro-Mesh keeps its superior properties longer – up to 15 time longer – than ordinary abrasives.
Can use wet or dry. Using wet will prolong life and flush out metal waste, keeping Micro-Mesh® cleaner. Best results will be achieved when using Micro-Mesh® with light pressure and/or at low rotational speeds.
Micromesh Grits
Micromesh works a bit differently from standard abrasives, use this chart to choose the grit you require by comparing to standard FEPA grits.
Click Here to check you our handy conversion chart and read a little more about Micro-Mesh.
| Weight | 0.12 kg |
|---|---|
| DISC PER 50 | 1 INCH, 2 INCH |
| BACKING | VELCRO, SELF ADHESIVE |
| MICRO-MESH GRADES | 1200MX Equivalent to 3 MICRON, 800MX Equivalent to 4 MICRON, 600MX Equivalent to 5 MICRON, 400MX Equivalent to 2500 FEPA GRIT, 360MX Equivalent to 2000 FEPA GRIT, 320MX Equivalent to 1500 FEPA GRIT, 240MX Equivalent to 1200 FEPA GRIT, 180MX Equivalent to 800 FEPA GRIT, 150MX Equivalent to 600 FEPA GRIT, 120MX Equivalent to 400 FEPA GRIT, 100MX Equivalent to 360 FEPA GRIT, 80MX Equivalent to 320 FEPA GRIT, 60MX Equivalent to 240 FEPA GRIT, 1500REG Equivalent to FEPA 800, 1800REG Equivalent to FEPA 1200, 2400REG Equivalent to FEPA 1500, 3200REG Equivalent to FEPA 2000, 3600REG Equivalent to FEPA 2500, 4000REG Equivalent to FEPA 5 micron, 6000REG Equivalent to FEPA 4 micron, 8000REG Equivalent to FEPA 3 micron, 12000REG Equivalent to FEPA 1 micron, 300 AO Equivalent to FEPA 180, 600 AO Equivalent to FEPA 400, 800 AO Equivalent to FEPA 600, 1500 AO Equivalent to FEPA 800, 2400 AO Equivalent to FEPA 2000, 3600 AO Equivalent to 8 Micron, 4000 AO Equivalent to 5 Micron, 6000 AO Equivalent to 4 Micron, 8000 AO Equivalent to 3 Micron, 12000 AO Equivalent to 1 Micron |
Other Related Products
Consumables
Consumables
Consumables
Consumables
Consumables