{"id":194,"date":"2020-06-22T17:11:35","date_gmt":"2020-06-22T16:11:35","guid":{"rendered":"https:\/\/www.revivetool.com\/?post_type=product&p=194"},"modified":"2023-04-16T03:06:00","modified_gmt":"2023-04-16T02:06:00","slug":"ultimate-metal-cleaning-and-polishing-kit","status":"publish","type":"product","link":"https:\/\/www.revivetool.com\/product\/ultimate-metal-cleaning-and-polishing-kit\/","title":{"rendered":"Ultimate Metal Cleaning & Polishing Kit"},"content":{"rendered":"
Our ultimate purpose drill-mounted cleaning and polishing metal kit<\/strong> takes all the hard work out of restoring almost any metal object or surface.<\/p>\n Simply mount your cleaning disks to your drill using the mandrel supplied. Watch all dirt, rust, debris and muck fly away.<\/p>\n Then use the polishing tool and compound to restore your object or surface to its former glory.<\/p>\n The rapid drill-mounted cleaning kit is suitable for most durable surfaces (metal, ceramic, wood, etc) and the polishing kit is suitable for both ferrous and non-ferrous metals.<\/p>\n Used For: <\/strong><\/p>\n Cleaning disks are used for cleaning metal, preparing for polishing by smoothing scratches. Also for satin finishing, they leave a nice even finish. The brown coarse mops will remove rust and grime and restore metal back to a matt shine. The red and green wheels are finer and will leave an attractive bright satin finish. They can be used on any metal surface from hard metals such as stainless steel to softer metals like aluminium and brass. The red and green wheels are also suitable for soft precious metals like gold and silver.<\/p>\n The polishing disks and compound is used for polishing all ferrous and non-ferrous metals (and can be used on other materials depending on the compound used – see our compound section).<\/p>\n Use With: <\/strong><\/p>\n A standard drill or air tool, any rotary tool that will take a 6mm spindle (one which also doesn\u2019t run faster than the 3,000RPM recommended).<\/p>\n You can use one wheel or all six, depending on how thick you want the tool to be.\u00a0 Sandwich the loose wheels between the two washers and thread onto the mandrel.<\/p>\n Tighten the reverse thread nut (the reverse thread on the tool means it won\u2019t come undone as the tool spins on your drill).<\/p>\n Attach the end of the mandrel to your drill. The mandrel fits most basic drills.<\/p>\n The Mandrel works with a reverse thread nut, sandwich the wheel between the two washers and mount onto the mandrel.<\/p>\n Tighten the reverse thread nut (the reverse thread on the tool means it won\u2019t come undone as the tool spins on your drill).<\/p>\n Attach the end of the mandrel to your drill. The mandrel fits most basic drills.<\/p>\n Use the drill to rotate the cleaning mops and apply lightly to your surface. A cream cleaner or compound can be used where appropriate.<\/p>\n We recommend using each grade one at a time. A speed lower than 3,000 RPM is recommended. Avoid tackling sharp corners, as they might wear quickly. These mops are designed to break down with use, this is why the correct speed is important. Start with the coarser wheels first working to the finer ones for best results.<\/p>\n ALWAYS<\/strong> test the Metal Cleaning & Polishing on a test surface before use. Abrasive disks can cause damage to soft and pliable surfaces.<\/p>\n Start with the dry sisal (roughest wheel) if you have scratches and marks to remove. Use the rough wheels with the darker compound. We recommend clamping the compound to a G clamp. Spin the wheels it against the cutting compound to load. Compound will melt and coat the wheel. Work over the metal ensuring you keep moving. Move on to the white stitched mop next. At this point you can either use cutting compound or polishing compound. Use the softest mop with lighter colour polishing compound for the final process and see the reflective shine appear in the metal.<\/p>\n ALWAYS<\/strong> test the Metal Cleaning & Polishing kit on a test surface before use. Abrasive mops and compound can cause damage to soft and pliable surfaces, and change the appearance of surfaces and objects.<\/p>\n ALWAYS<\/strong> follow the instructions of your power tool.<\/p>\n ALWAYS<\/strong> use personal protective equipment. Use of googles and gloves is recommended. Please Tie back loose cloths and hair.<\/p>\n Metal Cleaning & Polishing is a dirty job so please bare this in when choosing, making safe and cleaning your work area. An appropriate ventilation system is recommended. Always clean the area after use, using an appropriate vacuum system. Micro-plastics can be released as the nylon cleaning disk degrades – so please contain and clean up the particles to prevent escape into the environment.<\/p>\nKit Contents<\/h2>\n
\n
How to assemble the drill-mounted metal cleaning kit<\/h2>\n
How to assemble the drill-mounted metal polishing kit<\/h2>\n
How to use the drill-mounted metal cleaning kit<\/h2>\n
How to use the drill-mounted metal polishing kit<\/h2>\n
Cleaning & Polishing Safety<\/h2>\n