{"id":190,"date":"2020-06-22T14:28:54","date_gmt":"2020-06-22T13:28:54","guid":{"rendered":"https:\/\/www.revivetool.com\/?post_type=product&p=190"},"modified":"2023-10-31T00:08:00","modified_gmt":"2023-10-31T00:08:00","slug":"metal-polishing-kit-drill-mounted-for-non-ferrous-metals-like-alluminium-copper-brass","status":"publish","type":"product","link":"https:\/\/www.revivetool.com\/product\/metal-polishing-kit-drill-mounted-for-non-ferrous-metals-like-alluminium-copper-brass\/","title":{"rendered":"Metal Polishing Kit – Drill-Mounted (for non-ferrous metals like aluminium, brass, copper, etc)"},"content":{"rendered":"
Our general purpose drill-mounted metal polishing kit<\/strong> takes all the hard work out of restoring hard metals surfaces or objects. Simply mount your polishing mops to your drill using the mandrel supplied. Use the polishing compound supplied, and watch your surface or object return to a brilliant shine as you restore it to its former glory (without all the hard work!).<\/p>\n The rapid drill-mounted polishing kit is suitable for polishing non-ferrous metals such as aluminium, brass, copper, nickel (see our other kits for polishing ferrous metals such as steel and iron<\/a>).<\/p>\n Metal Polishing kit <\/strong><\/p>\n See our other kits for polishing ferrous metals such as steel and iron<\/a>, etc. These contain Pink and Black compound (for polishing and cutting ferrous metals). Compounds for other surfaces are available too.<\/p>\n Used for: <\/strong><\/p>\n Polishing all non-ferrous metals (and can be used on other materials depending on the compound used – see our compound section).<\/p>\n Use With: <\/strong><\/p>\n A standard drill or air tool, any rotary tool that will take a 6mm spindle (one which also doesn\u2019t run faster than the 3,000RPM recommended).<\/p>\n The Mandrel works with a reverse thread nut, sandwich the wheel between the two washers and mount onto the mandrel.<\/p>\n Tighten the reverse thread nut (the reverse thread on the tool means it won\u2019t come undone as the tool spins on your drill).<\/p>\n Attach the end of the mandrel to your drill. The mandrel fits most basic drills.<\/p>\n Start with the dry sisal (roughest wheel) if you have scratches and marks to remove. Use the rough wheels with the darker compound. We recommend clamping the compound to a G clamp. Spin the wheels it against the cutting compound to load. Compound will melt and coat the wheel. Work over the metal ensuring you keep moving. Move on to the white stitched mop next. At this point you can either use cutting compound or polishing compound. Use the softest mop with lighter colour polishing compound for the final process and see the reflective shine appear in the metal.<\/p>\n ALWAYS<\/strong> test the metal-polishing kit on a test surface before use. Abrasive mops and compound can cause damage to soft and pliable surfaces, and change the appearance of surfaces and objects.<\/p>\n ALWAYS<\/strong> follow the instructions of your power tool.<\/p>\n ALWAYS<\/strong> use personal protective equipment. Use of googles and gloves is recommended. Please Tie back loose cloths and hair.<\/p>\n Metal work is a dirty job so please bare this in when choosing, making safe and cleaning your work area. An appropriate ventilation system is recommended. Always clean the area after use, using an appropriate vacuum system. Micro-plastics can be released as the nylon cleaning disk degrades – so please contain and clean up the particles to prevent escape into the environment.<\/p>\n Please check the product terms and conditions here<\/a>.<\/p>\n We also sell refill packs of polishing mobs of all types:<\/p>\nDrill-Mounted Metal Polishing Kit – Contents<\/h2>\n
\n
How to assemble the drill-mounted metal polishing kit<\/h2>\n
How to use the drill-mounted metal polishing kit<\/h2>\n
Safety<\/h2>\n
Refills & Complementary Kits<\/h2>\n
\n