{"id":168,"date":"2020-06-17T17:13:18","date_gmt":"2020-06-17T16:13:18","guid":{"rendered":"https:\/\/www.revivetool.com\/?post_type=product&p=168"},"modified":"2023-01-03T12:11:20","modified_gmt":"2023-01-03T12:11:20","slug":"rapid-cleaning-kit-drill-mounted","status":"publish","type":"product","link":"https:\/\/www.revivetool.com\/product\/rapid-cleaning-kit-drill-mounted\/","title":{"rendered":"Rapid Cleaning Kit – Drill-Mounted"},"content":{"rendered":"
Our general purpose drill-mounted cleaning kit<\/strong> takes all the hard work out of cleaning and restoring almost any large object or surface. Simply mount your cleaning disks to your drill using the mandrel supplied. Watch all dirt, rust, debris and muck fly away and restore your object or surface to its former glory.<\/p>\n The rapid drill-mounted cleaning kit is suitable for most durable surfaces. Metal, ceramic, wood, etc.<\/p>\n Used For: <\/strong><\/p>\n Cleaning metal, preparing for polishing by smoothing scratches. Also for satin finishing, they leave a nice even finish. The brown coarse mops will remove rust and grime and restore metal back to a matt shine. The red and green wheels are finer and will leave an attractive bright satin finish. They can be used on any metal surface from hard metals such as stainless steel to softer metals like aluminium and brass. The red and green wheels are also suitable for soft precious metals like gold and silver.<\/p>\n Use With: <\/strong><\/p>\n A standard drill or air tool, any rotary tool that will take a 6mm spindle (one which also doesn\u2019t run faster than the 3,000RPM recommended).<\/p>\n You can use one wheel or all six, depending on how thick you want the tool to be.\u00a0 Sandwich the loose wheels between the two washers and thread onto the mandrel.<\/p>\n Tighten the reverse thread nut (the reverse thread on the tool means it won\u2019t come undone as the tool spins on your drill).<\/p>\n Attach the end of the mandrel to your drill. The mandrel fits most basic drills.<\/p>\n Use the drill to rotate the cleaning mops and apply lightly to your surface. A cream cleaner or compound can be used where appropriate.<\/p>\n We recommend using each grade one at a time. A speed lower than 3,000 RPM is recommended. Avoid tackling sharp corners, as they might wear quickly. These mops are designed to break down with use, this is why the correct speed is important. Start with the coarser wheels first working to the finer ones for best results.<\/p>\n ALWAYS<\/strong> test the cleaning disks on a test surface before use. Abrasive disks can cause damage to soft and pliable surfaces.<\/p>\n ALWAYS<\/strong> follow the instructions of your power tool.<\/p>\n ALWAYS<\/strong> use personal protective equipment. Use of googles and gloves is recommended. Please Tie back loose cloths and hair.<\/p>\n Metal work is a dirty job so please bare this in when choosing, making safe and cleaning your work area. An appropriate ventilation system is recommended. Always clean the area after use, using an appropriate vacuum system. Micro-plastics can be released as the nylon cleaning disk degrades – so please contain and clean up the particles to prevent escape into the environment.<\/p>\nDrill-Mounted Cleaning Kit – Contents<\/h2>\n
\n
How to assemble the drill-mounted cleaning kit<\/h2>\n
How to use the drill-mounted cleaning kit<\/h2>\n
Safety<\/h2>\n